Ikegami BS-98 Operation Manual Download Page 87 | Manualshive

Page: 87 / 118

Ikegami BS-98 Operation Manual Download Page 87

73

BS-98 1409 VER1 (U) (E)

5.1 Settings from the BS Menu

RET VIDEO FORMAT

RET VIDEO FORMAT sets the return video signals.

▲
ＳＹＳＴＥＭＦＯＲＭＡＴ
ＯＵＴＰＵＴＦＯＲＭＡＴ
ＲＥＴＶＩＤＥＯＦＯＲＭＡＴ
ＰＨＡＳＥＣＯＮＴＲＯＬ
ＭＩＣＭＡＮＡＧＥＭＥＮＴ
ＩＮＣＯＭＭＡＮＡＧＥＭＥＮＴ
▼

＊＊＊ＥＮＧＩＮＥＥＲ（１／２）＊＊＊

ＲＥＴ１１０８０Ｉ５９ＩＮＦＳＯＦＦ
ＲＥＴ２５２５Ｉ５９ＩＮＦＳＯＮ
ＲＥＴ３ＮＯＮＤＥＴＥＣＴＦＳＯＦＦ
ＲＥＴ４ＮＯＮＤＥＴＥＣＴＦＳＯＦＦ

ＡＣＴＩＶＥ−ＴＨＲＯＵＧＨＯＦＦ

ＳＤＳＣＲＥＥＮＭＯＤＥ４：３

ＲＥＴＶＩＤＥＯＦＯＲＭＡＴ

To position the

fl

ashing cursor on the "RET

VIDEO FORMAT", and determine.

The submenu "RET VIDEO FORMAT"
is displayed, on which you can perform
various settings.

ＲＥＴ１１０８０Ｉ５９ＩＮＦＳＯＦＦ
ＲＥＴ２１０８０Ｉ５９ＯＵＴ -----
ＲＥＴ３５２５Ｉ５９ＩＮＦＳＯＦＦ
ＲＥＴ４５２５Ｉ５９ＯＵＴ -----

ＡＣＴＩＶＥ−ＴＨＲＯＵＧＨＯＮ

ＳＤＳＣＲＥＥＮＭＯＤＥ４：３

ＲＥＴＶＩＤＥＯＦＯＲＭＡＴ

When the "ACTIVE-THROUGH" ON

Setting Item

Set Value

Description

RET-1

Input signal display

FS ON/OFF

Signals that are input to RETURN-1 are automatically recognized and the format
is displayed. When an asynchronous signal or a signal with a different frame rate
is input, FS (Frame Synchronizer) automatically turns on.

RET-2

Input and output signal

display

FS ON/OFF

Signals that are input to RETURN-2 are automatically recognized and the format
is displayed. When an asynchronous signal or a signal with a different frame rate
is input, FS (Frame Synchronizer) automatically turns on.

RET-3

Input signal display

FS ON/OFF

Signals that are input to RETURN-3 are automatically recognized and the format
is displayed. When an asynchronous signal or a signal with a different frame rate
is input, FS (Frame Synchronizer) automatically turns on.

RET-4

Input and output signal

display

FS ON/OFF

Signals that are input to RETURN-4 are automatically recognized and the format
is displayed. When an asynchronous signal or a signal with a different frame rate
is input, FS (Frame Synchronizer) automatically turns on.

ACTIVE-THROUGH

OFF

RET_IN channels 1 to 4 on the rear side function as input ports.

ON

RET_IN channels 1 and 3 on the rear side function as input ports, and channels 2
and 4 function as output ports.

SD SCREEN MODE

4

:

3

The aspect ratio of SDTV input signal is set to 4

:

3.

16

:

9

The aspect ratio of SDTV input signal is set to 16

:

9.

LETTER

SDTV input signal is set to the letter box mode.

・

Three rate signals of 3G-SDI/HD-SDI/SD-SDI are automatically recognized.

・

When the ACTIVE-THROUGH function is used, both CCU and the camera head have the two return channel speci

fi

cation.

When the CCU/BS power is not on, through output is not executed.

・

SDTV input signal is conformable to the SDI signal only and not VBS.

・

When the input signal format switches to a signal that does not require FS while the FS (Frame Synchronizer) is on, the FS does

not turn off automatically. If FS is not necessary, turn off FS manually.

«
...
85
86
87
88
89
...
»

Summary of Contents for BS-98























































































































Reviews:

No comments