IHIMER 9VXE, Original Instructions Manual

Page: 39 / 118

OPERATION
9VXE ENG 2-11
Starting Engine with Booster Cables
Follow the instructions shown below to start the engine using the booster cables.
•
If the booster cables are connected improperly, the battery will be shorted, resulting in
a dangerous accident. Never connect the + and - terminals.
•
The battery produces flammable hydrogen gas, which is explosive. Do not bring fire
close to it or produce sparks near it.
The electrical circuits of this machine run on 12 V.
Use a 12 V auxiliary battery.
Order of connecting booster cables
1. Set the engine key switches of the normal machine
and machine in trouble to the OFF positions.
2. Connect the clip of the booster cable (red) to the +
terminal of the machine in trouble. Connect the other
clip to the + terminal of the normal machine.
3. Connect the clip of the booster cable (black) to the -
terminal of the normal machine. Connect the other clip
to the upper frame of the machine in trouble.
Starting engine
1. Make sure that the cable clips are connected to the
battery terminals and upper frame firmly.
2. Start the engine of the normal machine and keep the
engine running at high revolution.
3. Start the engine of the machine in trouble.
Disconnecting booster cables
1. Disconnect the clip of the black cable from the upper
frame first. Then, disconnect the clip from the -
terminal of the normal machine.
2. Disconnect the clip of the red cable from the + terminal
of the normal machine first. Then, disconnect the clip
from the + terminal of the machine in trouble.
WC-C200410
Never connect the + and - terminals
WC-C200420
(Red)
(Black)
Battery of
normal machine Battery of machine
in trouble
Upper frame of machine in trouble
Order of connecting booster cables
Order of disconnecting booster cables