IHIMER 9VXE, Original Instructions Manual, Page: 32 / 118

OPERATION
9VXE ENG 2-4
6. Engine key switch
Use this switch to start and stop the engine.
HEAT (preheat)
The HEAT position is used to preheat the cool engine
in cold seasons. Preheating is complete by holding the
switch at the HEAT position for approximately 4
seconds. Turn the key to the START position then.
OFF (stop)
The key may be inserted and drawn out at this
position. All electric system switches are off and the
engine stops.
ON (run)
The electric system is powered on and the warning
lamp turns on. Keep the switch at this position while
the engine is running.
START (start)
Set the switch to this position to start the engine.
Release the fingers from the key immediately after the
engine starts.
The key returns to the ON position automatically.
7. Horn switch
Press this switch to turn on the horn.
WB-C210080
WB-C210090
Horn switch