IHIMER 9VXE, Original Instructions Manual

Page: 59 / 118

OPERATION
9VXE ENG 2-31
PTO (POWER TAKE-OFF) FOR SPECIAL ATTACHMENT USE
•
Select proper special attachments such as for example hydraulic breakers, iron forks,
special hydraulic devices that can be hold by machinery.
•
Some special accessories require reinforcement on arms. Get in touch with our dealer
for further information about it.
•
Read carefully manuals supplied by manufacturers and understand well the content
before using special accessories.
•
The assembly of a special attachment on machinery could affect many aspects, as for
example the stability and transport dimensions. Be careful.
Pedal operation way or control lever may differ from a
special attachment to another. Use special attachments
properly, as described as follows.
Simple effect use (breaker hammer)
1. Connect supply hydraulic pipe to “A port” and the
return hydraulic pipe to the “B port”.
2. Turn the valve tap (3) with the key CH13 (included)
and move the signal in the indicated position.
If valve sign is as shown in the return pressure
becomes higher and the hammer does not work
correctly.
Keep ALWAYS sign in position as shown .
3. Move the pedal (1) to working operation.
4. Step on front side of pedal to operate hammer. Step
the pedal in neutral position to stop it.
5. Step the pedal in neutral position and close the cover
to block it when we do not use the pedal.
•
Make sure that the stop limit of the pedal is
adjusted as shown in the figure, in the case of
new assembly of the pedal or in case of
passage from single to double-acting effect.
•
Adjust height of stop limit (2) in order that the
pedal (1) touches head of screw when is in
neutral
position and avoiding eventual
movement if we push on rear side.
WB-C210480
"B port"
(Return hose)
"A port"
(Supply hose)
WB-C210490
Step on to activate
the breaker
Lock position
Working position
WB-C210500
Neutral position
Contact with the pedal stopper at
the pedal neutral position
Operation position
simple effect
3