iGuard FPS110
P.22
The Attendance Report is particularly useful for payroll purpose. However, it is only
meaningful if the system is used as a Time Attendance System. If used as an
Access Control System, you can still retrieve the report, but the contents of the
report may not be as useful.
Similar to the Access Log Report, you can specify the employee’s ID and / or the
Time Period of the Attendance Report.
Employee – List
The
Employee List
lists all the registered employees as shown below:-
There are four
green
indicators listed on the right side of the list:
o
The
Active
Indicator indicates that the employee is in Active status (i.e., not
suspended).
o
The
FP
(Fingerprint) indicator indicates that the Fingerprint Information is
available for the employee. It is possible to add an employee through the
browser first, and later on register (enroll) the fingerprint of the employee at the
device. If the employee is added this way, the FP indicator will be blank for that
employee, until he/she has registered his/her fingerprint image.
o
The
PSW
(Password) indicator indicates that the user has a personal password.
This personal password is used to replace the use of fingerprint to authenticate
the person. As mentioned earlier in the manual, there are people with skin
problem of their fingers that are unable to work with the fingerprint sensor. These
people either have skin problems such as peel-off skin, or have extremely dry
