iGuard FPS110
P.9
Connections – Corporate Network
You can connect iGuard FPS110 directly to your corporate computer network via
standard RJ-45 cabling & TCP/IP protocols. By connecting it to the network, you can
manage & monitor the unit via any standard Internet Browser (such as Microsoft
Internet Explorer & Netscape Navigator).
The connection is optional if the product is used solely as an Access Control System.
However, some of the features must be setup and maintained via the Internet
Browser (such as assigning the authorized time period for an individual to access). If
you want to use the feature, you must connect the product to your corporate network.
If it is used as a Time Attendance System, you must connect iGuard FPS110 to the
network, since the Internet Browser is required to retrieve the attendance records
and reports.
The connection is very straightforward as shown in the following picture:
POWER-UP
After powering up iGuard, it will perform a self-test, then it will enter the standby
mode as shown below: -
Description
LCD Display
Initializing...
1. Power Up -- when iGuard is power-up, it will perform a
self-test…
iGuard Security
Loading.....
2. After about 10 sec., the device will load the system
program…
Mon Aug 30 12:00
ID #:_
3. After loading the system program, iGuard will enter the
standby mode and is now ready to use.
