iGuard FPS110
P.23
fingers. Once these people are assigned personal passwords, they can use their
personal passwords to access the device as follows:
Description
LCD Display
Mon Aug 30 13:49
A01_ IN
1. While in Standby Mode, key in the user ID number
(e.g., A01).
Your Password:
_
2. Instead of lifting the shutter and placing the finger on
the sensor, press the
Func
key.
Your Password:
123456_
3. Enter the personal password (e.g., 123456).
Authorized!
4. Press
Func
key again to confirm. If the personal
password is correct, the person is authenticated and
the message will appear.
o
The
AM
(Auto-Match) indicator indicates that the particular user can use the
auto-match feature. The user can just simply lift the shutter and place the finger
on the sensor for authentication, without the need to enter his ID first.
You can also select a group of employees to display in the web page by adding the
constraints at the top of the page and press the GO button.
Scroll down to the bottom of the right panel, and you will see the three buttons,
Activate, Deactivate & Delete. You can Activate, Deactivate & Delete a single
employee or a group of employees by first checking the checkbox and then press the
corresponding button.
Please note that once an employee is deleted, all the data associated with the
employee, including the fingerprint information, will be deleted. You must re-enroll
the employee again if you decide to add the employee back in the future.
You may be asked to enter the Administrator ID and Password for the operation.
The default Administrator ID is “
admin
”, and the default Administrator Password is
“
123
”.
You can press the employee ID hyperlink to edit the information of each employee,
including the employee’s name and the department he/she belongs to, as shown in
the following figure.
