iGuard FPS110
P.10
CONFIGURING YOUR IGUARD FPS110 (FUNCTION 5)
This section describes how to set the system date & time, the network & TCP/IP
settings, passwords, and test your network connection. The administrator password
is required for the system administrator to access the system menu and to configure
the system parameters.
The default administrator password is 123.
Setting the date and time
You need to enter the date and time so that iGuard FPS110 can time stamp all the
access & time attendance records. Follow these steps to set the system date and
time: -
Description
LCD Display
Enter Password:
_
1. While in Standby Mode, press the
Func
key to enter
the Setup Menu. You will be prompted to enter the
Administrator Password as shown.
Enter Password:
123_
2. Enter the Administrator Password (e.g. 123).
Press 1:
Add user
:
:
Press 5: System
Configuration..
3. Press the
Func
key to continue. The setup menu will
scroll down slowly as shown.
Date (M/D/Y):
08/30/1999
4. Enter
5
to select the
System Configuration
menu.
The current date is displayed. If necessary, enter the
new date and then press the
Func
key to continue.
Time (H:M:S):
13:45:23
5. After pressing the
Func
key, the current time is
displayed. Enter the new time then press the
Func
key
to continue.
Name:
_
6. The system will then ask for the name
(to be continued
in the next section… .)
.
Note:
iGuard FPS110 can keep the date & time running without power for approximately
two days. Also, there is a software tool for users to synchronize the clock of the
iGuard device with the desktop PC (
iSetClock.exe
), which can be downloaded
freely at the website.
