iGuard FPS110
P.18
Deleting ID (Function 4)
You can permanently delete a user using similar procedure as described above, and
it is illustrated as follows: -
Description
LCD Display
ID to Delete:
_
1. While in Standby Mode, press the
Func
key to enter
the Setup Menu. Enter the Administrator Password
(default 123) and press
Func
key, then press
4
to
select “
Delete ID
” menu.
ID to Delete:
A01_
2. Enter the ID # you want to delete (e.g., A01).
ID# A01
Deleted!
:
:
Mon Aug 30 13:49
ID #:_
3. Press the
Func
key to confirm. The ID # is deleted,
and the user can no longer get access. The system will
return to Standby mode.
Note:
Once an employee ID is deleted, all the information associated with the employee ID,
such as the fingerprint data and the access rights, will also be permanently deleted.
You must re-enroll the employee if necessary.
Resetting the device (Function 7)
The device can be turned off easily by just simply turning the power off. However,
there is a very small chance that the unit is in the process of accessing and updating
the internal flash memory at the moment when the power is discontinued. This may
result in data loss.
The safe way to turn the unit off is to do a proper shut down by accessing
Func 7
in
the menu. You can also reset the user database and the access log with this
function. In addition, you can reset all the settings to the factory default (such as
setting the IP address to the default 192.168.0.100, and the terminal name to
iGuard … etc.).
Auto – Match (Function 8)
This feature enables the device to identify a person without requiring the user to first
enter his/her user ID, and must be turn on via the Internet Browser (described in the
next section).
