iGuard FPS110
P.14
After specifying the authorized time and terminals, you can gain access using the
Access Password, and it is illustrated in the following steps: -
Description
LCD Display
Enter Password:
_
1. Press the
Func
key while in the Standby Mode. You
will then be asked to enter the password.
Enter Password:
*********_
2. Enter the Access Password (such as 9394AB709). The
password is shown as astride for security reason.
Mon Aug 30 13:49
ID #:_
3. Press the
Func
key again to proceed. If the password
is right, iGuard will release the door strike, and will
return to the Standby Mode.
More details about using the Internet Browser will be discussed in later sections.
