iGuard FPS110
P.17
Note
: there is another feature called
Auto-Match
, which allows the user to access
the device without the need to enter his ID first. This feature will be discussed later
in this section.
Suspending / Resuming User (Function 2 / 3)
You can temporary suspend a user ID. This is useful if you want to temporary stop a
user from getting into your business premises, and you may want to resume his
access right later on. This is done via the function “
Inactive ID
” in the function
menu, and it is illustrated in the following steps: -
Description
LCD Display
Enter ID :
_
1. While in Standby Mode, press the
Func
key to enter
the Setup Menu. Enter the Administrator Password
(default 123) and press
Func
key, then press
2
to
select “
Inactive ID
” menu.
Enter ID :
A01_
2. Enter the ID # you want to suspend (e.g., A01).
ID# A01
Inactivated!
:
:
Mon Aug 30 13:49
ID #:_
3. Press the
Func
key to confirm. The ID # is suspended,
and the user can no longer be authenticated. The
system will return to Standby mode.
To resume a user ID, select function 3 (“Re-activate ID”) in the setup menu in step 1
above, and follow the same procedure.
Please note that you can also use the Internet Browser to Inactivate and Re-activate
the ID. It will be discussed in later sections.
