5.1.5 Motion
This menu allows you to configure motion parameters. When motion has been detected.
by one or more cameras, your NVR will alert you to a potential threat at your home. It does this by
sending you an email alert with an attached image from the camera to use as a reference (if this option is
enabled) and/or sending push notifications via the mobile app.
Setup:
Click icon into the setup page.
Motion Detection Area:
The whole screen is marked for motion detection
(red blocks) as default. If you want to disable the
motion detection on a certain area, click the grid
cursor and then drag the mouse to highlight the
scope to unmark the area into transparent
blocks. After setting is completed, click the right
button of your mouse to return and click
Save
to
make the area setup effective.
Switch:
Enable or disable motion detection.
Sensitivity:
Set the sensitivity level. Level 1 the lowest sensitivity level while level 8 is the highest
sensitivity level.
Click Alarm button to configure the motion detectionalarm function:
Channel:
Channel name
Buzzer:
The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in
seconds when the motion is detected.
Alarm Out:
Optional function. If your NVR support to connect to external alarm device, you can set to
emit an alarm tone.
Latch Time:
To configure the external alarm time when motion is detected.
Record:
Click icon and choose which channel(s) you want to record when the motion detection is
triggered.
23
