54
iGage
iG8 User Manual
the right of the ‘Network NTRIP’ setting):
Enter the correct service Name, IP Address, Port, User
Name and Password for your network.
The Name is a description of the network source which
you can assign freely
The ‘IP’ can be either a dotted value like
‘168.179.231.9’ or a resolvable network name. The
port is supplied by the network operator.
Both the ‘User Name’ and ‘Password’ are case
sensitive and must match your network credentials
exactly.
Double-check your settings and then click on the green
checkmark.
The data collector will load the mount table via the
internet and display the list of bases. If the GSM SIM
Card has not previously been activated, the process
may fail (as the network conducts background security
authorizations). If provisioning fails cancel and cycle
the head power to reset the GSM Cellular Modem. The
network typically will work on the second try.
After a moment, you should see a list of ‘Mount Points’
for the RTK Network. Choose the best mount point for
Set the Name, IP Address, Port and RTK Message Type
to match the DIP base you are attaching to.
The Name is a description of the network source which
you can assign freely.
The ‘IP’ can be either a dotted value like
’50.247.53.84.’ or a resolvable network name like
‘apis1.us’.
The port is supplied by the network operator.
The RTK Message Type is not critical as the receiver
will automatically adjust to the stream.
Double-check your settings and then click on the green
checkmark.
(1) Check the ‘Base ID’ then (2) click the green check
mark to complete the DIP setup.
