UK
IO-Link master
7
► Devices that are designed for mounting in housings or control cabinets must
only be operated and controlled after they have been installed with the housing
closed� Desktop or portable units must only be operated and controlled in
enclosed housings�
► Measures should be taken to ensure the proper restart of programs interrupted
after a voltage dip or failure� This should not cause dangerous operating states
even for a short time� If necessary, an emergency stop must be carried out�
► Wherever faults in the automation system may cause personal injuries or
damage to property, external measures must be implemented to ensure a safe
operating state in the event of a fault or malfunction (e�g� by means of separate
limit switches, mechanical interlocks etc�)
► The electrical installation must be carried out in accordance with the relevant
regulations (e�g� with regard to cable cross-sections, fuses, PE)�
► All work relating to transport, installation, commissioning and maintenance
must only be carried out by qualified personnel� (IEC 60 364 or HD 384 or
DIN VDE 0100 and national work safety regulations have to be observed)�
► All shrouds and doors must be kept closed during operation�
3 Documentation
This documentation relates to the hardware and firmware status at the time of
editing this manual� The features of the devices are continuously developed further
and improved�
4 Functions and features
The devices have been designed for use in applications described in this manual
and the device-specific data sheets�
Adhere to the data indicated in the data sheets and in the manual� If the handling
specifications and safety instructions for configuration, installation and operation
indicated in the documentation are adhered to, the devices normally do not lead to
a danger for persons and objects�
The input and output devices of the IO-Link master have been designed for
automation tasks in harsh environmental conditions� The devices meet the
requirements of IP65/67 protection rating� They enable direct connection of
sensors and actuators in an environment close to the station�
The devices are available with M12 connection technology�
The devices cannot be extended and have a directly integrated fieldbus
connection and I/O level� They are used for distribution in the field when only a few
digital or analogue I/O points are required�
