IO-Link master
14
9.9 Installation instructions
Electrostatic discharge
The device contains components that can be damaged or destroyed by
electrostatic discharge� When handling the device, observe the necessary safety
precautions against electrostatic discharge (ESD) according to EN 61340-5-1 and
IEC 61340-5-1�
Damage to the electronics
► The device may only be installed and removed by qualified electricians in accordance with the
ESD regulations�
► Implement the FE connection using mounting screws, in order to ensure immunity to interference�
► To ensure IP65/IP67 protection, cover unused connections with protective caps�
► Only supply the sensors with the voltage U
S
which is provided at the terminal points�
► Avoid polarity reversal of supply voltages U
S
and U
A
�
Data corruption or loss
► Implement the FE connection using mounting screws, in order to ensure immunity to interference�
9.10 Mounting distances
No specific distances are required between devices or between a device and a
cabinet door or cover� Mounting distances are determined solely by the plugs used
and the bending radii of the cables�
9.11 Mounting dimensions
► Screw the device directly onto the flat mounting surface using the drill holes (1)
of the fixing clips�
