IFM E89005 Operating Instructions Manual Download Page 37

Page: 37 / 53

Electronic Preset Counter E89005

Display

Description

Submenu

Value

SUB mode output operations:

permanent signal at Output 1,

becomes passive when count <

Preset 1
ADD mode output operations:

timed signal at Output 1,

becomes active when count >

Preset 1. (Activation only in

positive direction)

SUB mode output operations:

timed output at Output 1,

becomes active when count <

Preset 1 (Activation only in

negative direction)
ADD mode output operations:

timed signal at Output 1,

becomes passive when count >

Preset 1. (Deactivation only in

positive direction)

SUB mode output operations:

timed output at Output 1,

becomes passive when count <

Preset 1. (Deactivation only in

negative direction).
ADD mode output operations:

timed signal at Output1,

becomes active with positive

direction and when count >

Preset 1 and subsequently active

with negative direction and when

count < Preset 1

SUB mode output operations:

timed signal at Output 1,

becomes active with negative

direction and when count <

Preset 1 and subsequently active

with positive direction and when

count > Preset 1
ADD mode output operations:

timed signal at Output1,

becomes passive with positive

direction and when count >

Preset 1 and subsequently

passive with negative direction

and when count < Preset 1

SUB mode output operations:

timed output at Output 1,

becomes passive with negative

direction and when count <

Preset 1 and subsequently

passive with positive direction

and when count > Preset 1
Duration of timed signal of

Output 1, programmable from

00.01 to 99.99 s.

Timed signal is post-triggered

7.8.6.6 Submenu for Preset 2

Submenu for Preset 2

ADD mode output operations:

permanent signal at Output 2,

becomes active when count >

Preset 2

SUB mode output operations:

permanent signal at Output 2,

becomes active when count <

zero
ADD mode output operations:

permanent signal at Output 2,

becomes passive when count >

Preset 2

SUB mode output operations:

permanent signal at Output 2,

becomes passive when count <

zero

ADD mode output operations:

timed signal at Output 2,

becomes active when count >

Preset 2 (Activation only in

positive direction).

SUB mode output operations:

permanent signal at Output 2,

becomes active when count <

zero (Activation only in negative

direction)

ADD mode output operations:

timed signal at Output 2,

becomes passive when count >

Preset 2 (Deactivation only in

positive direction)

SUB mode output operations:

permanent signal at Output 2,

becomes passive when count <

zero (Deactivation only in

negative direction).

ADD mode output operations:

timed signal at Output 2,

becomes active with positive

direction and when count >

Preset 2 and subsequently with

negative direction and when

count < Preset 2

SUB mode output operations:

timed signal at Output 2,

becomes active with negative

direction and when count < zero

and subsequently with positive

direction and when count > zero

ADD mode output operations:

timed signal at Output 2,

becomes passive with positive

direction and when count >

Seite 15

ADD mode output operations:

timed signal at Output 1, becomes passive when count ≥ Preset 1.

(Deactivation only in positive direction)
SUB mode output operations:

timed output at Output 1, becomes passive when count ≤ Preset 1.

(Deactivation only in negative direction)

SUB mode output operations:

permanent signal at Output 1,

becomes passive when count <

Preset 1
ADD mode output operations:

timed signal at Output 1,

becomes active when count >

Preset 1. (Activation only in

positive direction)

SUB mode output operations:

timed output at Output 1,

becomes active when count <

Preset 1 (Activation only in

negative direction)
ADD mode output operations:

timed signal at Output 1,

becomes passive when count >

Preset 1. (Deactivation only in

positive direction)

SUB mode output operations:

timed output at Output 1,

becomes passive when count <

Preset 1. (Deactivation only in

negative direction).
ADD mode output operations:

timed signal at Output1,

becomes active with positive

direction and when count >

Preset 1 and subsequently active

with negative direction and when

count < Preset 1

SUB mode output operations:

timed signal at Output 1,

becomes active with negative

direction and when count <

Preset 1 and subsequently active

with positive direction and when

count > Preset 1
ADD mode output operations:

timed signal at Output1,

becomes passive with positive

direction and when count >

Preset 1 and subsequently

passive with negative direction

and when count < Preset 1

SUB mode output operations:

timed output at Output 1,

becomes passive with negative

direction and when count <

Preset 1 and subsequently

passive with positive direction

and when count > Preset 1
Duration of timed signal of

Output 1, programmable from

00.01 to 99.99 s.

Timed signal is post-triggered

7.8.6.6 Submenu for Preset 2

Submenu for Preset 2

ADD mode output operations:

permanent signal at Output 2,

becomes active when count >

Preset 2

SUB mode output operations:

permanent signal at Output 2,

becomes active when count <

zero
ADD mode output operations:

permanent signal at Output 2,

becomes passive when count >

Preset 2

SUB mode output operations:

permanent signal at Output 2,

becomes passive when count <

zero

ADD mode output operations:

timed signal at Output 2,

becomes active when count >

Preset 2 (Activation only in

positive direction).

SUB mode output operations:

permanent signal at Output 2,

becomes active when count <

zero (Activation only in negative

direction)

ADD mode output operations:

timed signal at Output 2,

becomes passive when count >

Preset 2 (Deactivation only in

positive direction)

SUB mode output operations:

permanent signal at Output 2,

becomes passive when count <

zero (Deactivation only in

negative direction).

ADD mode output operations:

timed signal at Output 2,

becomes active with positive

direction and when count >

Preset 2 and subsequently with

negative direction and when

count < Preset 2

SUB mode output operations:

timed signal at Output 2,

becomes active with negative

direction and when count < zero

and subsequently with positive

direction and when count > zero

ADD mode output operations:

timed signal at Output 2,

becomes passive with positive

direction and when count >

Seite 15

ADD mode output operations:

timed signal at Output1, becomes active with positive direction and when

count ≥ Preset 1 and subsequently active with negative direction and when

count ≤ Preset 1

SUB mode output operations:

timed signal at Output 1, becomes active with negative direction and when

count ≤ Preset 1 and subsequently active with positive direction and when

count ≥ Preset 1

SUB mode output operations:

permanent signal at Output 1,

becomes passive when count <

Preset 1
ADD mode output operations:

timed signal at Output 1,

becomes active when count >

Preset 1. (Activation only in

positive direction)

SUB mode output operations:

timed output at Output 1,

becomes active when count <

Preset 1 (Activation only in

negative direction)
ADD mode output operations:

timed signal at Output 1,

becomes passive when count >

Preset 1. (Deactivation only in

positive direction)

SUB mode output operations:

timed output at Output 1,

becomes passive when count <

Preset 1. (Deactivation only in

negative direction).
ADD mode output operations:

timed signal at Output1,

becomes active with positive

direction and when count >

Preset 1 and subsequently active

with negative direction and when

count < Preset 1

SUB mode output operations:

timed signal at Output 1,

becomes active with negative

direction and when count <

Preset 1 and subsequently active

with positive direction and when

count > Preset 1
ADD mode output operations:

timed signal at Output1,

becomes passive with positive

direction and when count >

Preset 1 and subsequently

passive with negative direction

and when count < Preset 1

SUB mode output operations:

timed output at Output 1,

becomes passive with negative

direction and when count <

Preset 1 and subsequently

passive with positive direction

and when count > Preset 1
Duration of timed signal of

Output 1, programmable from

00.01 to 99.99 s.

Timed signal is post-triggered

7.8.6.6 Submenu for Preset 2

Submenu for Preset 2

ADD mode output operations:

permanent signal at Output 2,

becomes active when count >

Preset 2

SUB mode output operations:

permanent signal at Output 2,

becomes active when count <

zero
ADD mode output operations:

permanent signal at Output 2,

becomes passive when count >

Preset 2

SUB mode output operations:

permanent signal at Output 2,

becomes passive when count <

zero

ADD mode output operations:

timed signal at Output 2,

becomes active when count >

Preset 2 (Activation only in

positive direction).

SUB mode output operations:

permanent signal at Output 2,

becomes active when count <

zero (Activation only in negative

direction)

ADD mode output operations:

timed signal at Output 2,

becomes passive when count >

Preset 2 (Deactivation only in

positive direction)

SUB mode output operations:

permanent signal at Output 2,

becomes passive when count <

zero (Deactivation only in

negative direction).

ADD mode output operations:

timed signal at Output 2,

becomes active with positive

direction and when count >

Preset 2 and subsequently with

negative direction and when

count < Preset 2

SUB mode output operations:

timed signal at Output 2,

becomes active with negative

direction and when count < zero

and subsequently with positive

direction and when count > zero

ADD mode output operations:

timed signal at Output 2,

becomes passive with positive

direction and when count >

Seite 15

ADD mode output operations:

timed signal at Output1, becomes passive with positive direction and when

count ≥ Preset 1 and subsequently passive with negative direction and when

count ≤ Preset 1

SUB mode output operations:

timed output at Output 1, becomes passive with negative direction and when

count ≤ Preset 1 and subsequently passive with positive direction and when

count ≥ Preset 1

t.Out 1

Duration of timed signal of Output 1

Timed signal is post-triggered

00.01

Factory setting

00.01...

99.99

Programmable from 00�01 to 99�99 s

factory settings are highlighted in grey

8.6.4 Preset 2

Submenues for preset 2�

Display

Description

Submenu

Value

PrES 2

Submenu for Preset 2

Pr.Out 2

Preset output 2

Tracking preset mode

When preset 2 is changed then

preset 1 automatically tracks it.

Reset to zero

Preset 1 relative to preset 2 (see

also section 17. Output

operations)
Tracking Preset mode with

automatic reset

When preset 2 is changed then

preset 1 automatically tracks it.

Reset to zero.

Automatic reset to zero when

main counter = preset value 2.

Preset 1 relative to Preset 2
(see also section 17. Output

operations)

7.8.6.3

Submenu for configuration

Submenu for matching the time

ranges and display

Unit of time
Unit of time: seconds

Decimal point setting determines

the resolution

Unit of time: minutes

Decimal point setting determines

the resolution

Unit of time: hours

Decimal point setting determines

the resolution

Unit of time: Hrs. Min. Sec.

Decimal point setting (Resolution)

Decimal place

(determines the resolution)

no decimal place

0.0

1 decimal place

0.00

2 decimal places

0.000

3 decimal places

Set value

Set value can be programmed

from 000000 to 999999

A previously programmed

decimal point will be displayed

Display colour (for 6.92x.x1x3.xx0]

Display colour

upper line

red

lower line

red

Display colour

upper line

red

lower line

green

7.8.6.4 Submenu for reset mode

Setting the reset mode

Manual reset (with red key) and

electrical reset (reset input)

No reset possible (red key and

reset input inhibited)

Only electrical reset possible

(reset input)

Only manual reset possible (red

key)

7.8.6.5 Submenu for Preset 1

Submenu for turning preset 1

ON/OFF

Preset 1 ON

Preset 1 OFF and no function

ADD mode output operations:

permanent signal at Output 1,

becomes active when count >

Preset 1

SUB mode output operations:

permanent signal at Output 1,

becomes active when count <

Preset 1

ADD mode output operations:

permanent signal at Output 1,

becomes passive when count >

Preset 1

Seite 14

ADD mode output operations:

permanent signal at Output 2, becomes active when count ≥ Preset 2

SUB mode output operations:

permanent signal at Output 2, becomes active when count ≤ zero

Tracking preset mode

When preset 2 is changed then

preset 1 automatically tracks it.

Reset to zero

Preset 1 relative to preset 2 (see

also section 17. Output

operations)
Tracking Preset mode with

automatic reset

When preset 2 is changed then

preset 1 automatically tracks it.

Reset to zero.

Automatic reset to zero when

main counter = preset value 2.

Preset 1 relative to Preset 2
(see also section 17. Output

operations)

7.8.6.3

Submenu for configuration

Submenu for matching the time

ranges and display

Unit of time
Unit of time: seconds

Decimal point setting determines

the resolution

Unit of time: minutes

Decimal point setting determines

the resolution

Unit of time: hours

Decimal point setting determines

the resolution

Unit of time: Hrs. Min. Sec.

Decimal point setting (Resolution)

Decimal place

(determines the resolution)

no decimal place

0.0

1 decimal place

0.00

2 decimal places

0.000

3 decimal places

Set value

Set value can be programmed

from 000000 to 999999

A previously programmed

decimal point will be displayed

Display colour (for 6.92x.x1x3.xx0]

Display colour

upper line

red

lower line

red

Display colour

upper line

red

lower line

green

7.8.6.4 Submenu for reset mode

Setting the reset mode

Manual reset (with red key) and

electrical reset (reset input)

No reset possible (red key and

reset input inhibited)

Only electrical reset possible

(reset input)

Only manual reset possible (red

key)

7.8.6.5 Submenu for Preset 1

Submenu for turning preset 1

ON/OFF

Preset 1 ON

Preset 1 OFF and no function

ADD mode output operations:

permanent signal at Output 1,

becomes active when count >

Preset 1

SUB mode output operations:

permanent signal at Output 1,

becomes active when count <

Preset 1

ADD mode output operations:

permanent signal at Output 1,

becomes passive when count >

Preset 1

Seite 14

ADD mode output operations:

permanent signal at Output 2, becomes passive when count ≥ Preset 2

SUB mode output operations:

permanent signal at Output 2, becomes passive when count ≤ zero

Summary of Contents for E89005






















































Search results

Summary of Contents for E89005

Reviews:

Related manuals for E89005

Brands by name

Popular brands

IFM E89005, Operating Instructions Manual

Search results

Summary of Contents for E89005

Reviews:

Related manuals for E89005

Brands by name

Popular brands