IFM E89005, Operating Instructions Manual

Page: 30 / 53

Electronic Preset Counter E89005
30
8.5.3 Config
Submenues for matching the input pulses and display�
Display Description
Submenu Value
tModE Unit of time
SEC Unit of time: seconds
Decimal point setting determines the resolution�
Min Unit of time: minutes
Decimal point setting determines the resolution�
hour Unit of time: hours
Decimal point setting determines the resolution�
h.Min.S Unit of time: Hrs� Min� Sec�
dp Decimal point setting (only optical function)
0
no decimal place
0.0 1 decimal place
0.00 2 decimal places
0.000 3 decimal places
SetPt Set value
000000
Factory setting
000000...
999999
Set value can be programmed from 000000 to 999999�
A previously programmed decimal point will be displayed�
CoLor
Display colour (not supported)
rEd Upper line red�
Lower line red�
rEdGrn Upper line red
Lower line green
factory settings are highlighted in grey
8.5.4 Reset mode
Submenues for reset mode�
Display Description
Submenu Value
rESmd Setting the reset mode
Man.EL Manual reset (with red key) and electrical reset (reset input)�
no rES No reset possible (red key and reset input inhibited)�
EL.rEs
Only electrical reset possible (reset input)�
MAnrE Only manual reset possible (red key)�
factory settings are highlighted in grey