IFM AC1403, Device Manual

Page: 57 / 174

SmartPLC DataLine with Profinet device interface
57
>
Change the Extended ID1 of the AS-i slave
41601
To set the Extended ID1 of an AS-i slave:
1 Select the menu page
► > or >
► Select an AS-i slave (→ Slave selector (→ S. 24 )).
►
Select [Setup] tab.
2 Set the Extended ID1
> The [ID1] list displays the current Extended ID1 value (hexadecimal format).
►
Select the desired value for Extended ID1 from the [ID1] list.
> Selected value is applied.
After changing the Extended ID1, the existing configuration no longer corresponds to the stored
configuration:
>
An error message appears (configuration error).
► Start a projection adaptation (→
Carry out a projection adaptation
(
→ S.
49 )).