SmartPLC DataLine with Profinet device interface
86
>
Display PROFINET data
41461
In order to display the PROFINET parameters and the device-specific parameters:
1 Select menu page
►
>
>
►
Select [Profinet data] tab.
2 Display PROFINET data
>
Page shows the following information:
Designation
Description
Possible values
[]Device information
Parameters of the PROFINET-device
[MAC ID]
MAC-ID of the device
e.g.
00:02:01:01:98:D4
[Device name]
Name of the device
[IP address]
IP address of the PROFINET-Interface
e.g.
[Device type]
type of the device
e.g.
asi-pn
[Host information]
Parameters of the PROFINET-Controller
(host)
[IP address]
IP address of the PROFINET-Controller
e.g.
192.168.10.1
[Host name]
Designation of the PROFINET-Controller
[Analog. channels/I-slave]
Number of analogue channels per projected
input slave
[Unknown]
Device is not connected to the
fieldbus master
[1 channel]
1 channel per single slave
OR:
1 channel per A slave
[2 channels]
2 channels per single slave
OR:
2 channels per A slave
[4 channels]
4 channels per single slave
OR:
2 channels per A/B slave
[Analog. channels/O-slave] Number of analogue channe3ls per projected
output slave
→ [Analog. channels/I-slave]
[Failsafe state]
Behaviour of the AS-i outputs in case of a
PROFINET-connection interruption
[Reset
outputs]
Outputs are reset to the preset
values
[Hold
outputs]
Outputs hold the values which were
available immediately before
interruption of the connection.
[Parameter download]
Transmission of the AS-i slave parameters
when establishing a PROFINET-connection
Parameters are not downloaded, i.e. AS-i
slaves are activated with the parameters
set on the device
Parameters are downloaded, i.e. when the
connection is established, the AS-i slave
parameters set in the projecting software
are PROFINET-downloaded by the
controller to the device.
[Profinet alarms]
Transmission of the PROFINET-alarms
No transmission of PROFINET-alarms
when errors occur in the gateway
Transmission of PROFINET-alarms when
errors occur in the gateway
[Swap IO]
Swap of assignment of the slave nibbles in
the byte
Assignment of the slave nibble remains
constant
