SmartPLC DataLine with Profinet device interface
83
Show Ethernet information
41660
To show Ethernet information regarding the configuration interface:
1 Select the menu page
►
>
►
Select [Ethernet information] tab.
2 Show Ethernet information
>
Page shows the following information:
Name
Description
[MAC ID]
MAC identification number of the interface
>
5.6.2
Interfaces: Configuration interface 2
42105
The [Konfigurationsschnittstelle 2] menu provides access to the settings of the Ethernet configuration
interface 2 (port X2).
The Ethernet configuration interfaces 1 (X3) and 2 (X8) must not be participants of the same
EtherNet subnet. Non-compliance may lead to connection problems under CODESYS.
► Configure IP settings so that interfaces X3 and X8 are part of different Ethernet subnets.
The menu functions correspond to the functions of the menu [Konfigurationsschnittstelle 1].
For information regarding the menu functions:
→
Interfaces: Konfigurationsschnittstelle 1
(
► For the selection of the menu page replace the symbol
by
!
