EN
6 - USE AND OPERATION
SIR-52-P/F
6 - Pag. 22 / 24
33 Close the lateral case.
34 Turn the
switch in
position.
35 Press the
key to rotate the clamp arm towards the drum.
36 Press the
key to close guides.
37 Press the
key to unlock the bar-pusher carriage.
38 Press the
key to feed the bar-pusher; place the bar-pusher inside the spindle and the
bar remnant in the collet with the carriage in the bar end area.
39 Press the
key to rotate the clamp arm outside the drum.
40 Press the
key.
41 Rotate the lathe spindle of any station whatsoever up to the OPEN COLLET position.
42 Press the
key.
43 Repeat all the operations from No. 21 to No. 38 up to the complete replacement of all bar-
pushers.
44 Press the
key.
6.10
BAR FEEDER STOP
CAUTION:
Do not stop the bar feeder through the emergency push-button unless
necessary.
- Finish the operations provided for by the working program.
- Stop the bar feeder by pressing the key
.
- Stop the lathe.
- Position the main switch on "0".
Summary of Contents for SIR 52 P
