EN
11 - COLLETS
SIR-52-P/F
11 - Pag. 30 / 34
11.4 COLLETS FOR TUBES 603P
COLLETS FOR TUBES - Table
CAUTION:
the external diameter of the collet must be at least 0.5 mm less than the
external diameter of the bar pusher.
INFORMATION:
The 603P collets….. fitted with a Schlenker coupling, allowing the assembly on
the rotating unit, are designed with an oversized length. Therefore, the 1st
feeding value of the bar pusher carriage shall be increased of 7,5 mm. with
respect to the standard value.
Code structure
A Bar diameter
B Example:
5 mm = 060
10 mm = 100
12.5 mm = 125
C Family to which it belongs
Summary of Contents for SIR 52 P
