IEMCA SIR 52 P, Manual For Use And Maintenance

Page: 119 / 174

7 - BAR FEEDER MAINTENANCE SIR-52-P/F
EN
7 - Pag. 19 / 20
7.4 PREPARING THE BAR FEEDER FOR MAINTENANCE TO THE LATHE
For easy maintenance of the lathe, it is possible to
remove some parts of the bar feeder and to use
the device to slide the feeding drum.
Removing the middle leg (A) - SIR 52 F (fig.
23);
See paragraph 4.4.5.
CAUTION:
The central foot removal and following
installation must be done when the
magazine is empty.
Removing the hydraulic drive unit (B) (fig.
23); see paragraph 4.5.
How to use the Sliding Feeding Drum
CAUTION:
Function to be undertaken with great
care, making sure that the bar feeder is
stable.
Open the rear cover, lower the lever (M) and
move the feeding drum backwards.