IEMCA SIR 52 P, Manual For Use And Maintenance

Page: 92 / 174

EN
6 - USE AND OPERATION SIR-52-P/F
6 - Pag. 16 / 24
6.7 BARSTOCKS - LOADING
In accordance with the two different models,
loading occurs as follows.
SIR 52 P
1 Start the bar feeder
2 The selector
must be positioned on 0. The
luminous pilot light emits a persistent light,
wait until it becomes flickering.
3 Open the case and manually load the magazine
plane with bars up to its filling (A).
DANGER - WARNING:
Do not manually lift loads exceeding 15
kg.
4 Close the case.
5 Bars are drawn from the feed chain.
6 When the luminous pilot light emits a flickering
light again, operations 3,4 and 5 have to be
repeated.
7 Carry out the above mentioned operations up to
the complete filling both of the magazine and
feed chain (B).
8 When the selector is positioned on 1, the
luminous pilot light is off; hence, the magazine is ready to feed the drum.
During the setting up operations of drum or other device, the selector must be
positioned on 0; should the feeding chain be unloaded, it stops after
approx. 35 sec.