IEMCA SIR 52 P, Manual For Use And Maintenance

Page: 109 / 174

7 - BAR FEEDER MAINTENANCE SIR-52-P/F
EN
7 - Pag. 9 / 20
7.2.11 Clamps device and bar-pusher locking - Alignment check
Check the clamps device (A) axis (fig. 11) is
aligned with the guide tube axis.
Keep to the following procedure: move the clamp
device to the "bar insertion into collet" position
and close the sprockets by pressing key
.
Sprockets must close without interfering with the
bar pusher inserted into the clamp device.
In case of misalignment, please apply to IEMCA
technical assistance department.
7.2.12 Hydraulic joint - Check
In case of troubles to the rotating joint (A)
(fig. 12) apply to IEMCA technical
assistance department.