IDK MSD-402, User Manual

Page: 25 / 120

MSD-402 User’s Guide
25
[Table 7.3] Factory default settings (2/3)
Function Factory default setting Page
Setting position, size, and masking
Sharpness 0 50
Input Brightness 100% 50
Input Contrast R / G / B: 100% 50
HUE 0
°
50
Saturation 100% 51
Black level
±
0.0% 51
Output Brightness 100% 50
Output Contrast R / G / B: 100% 50
Gamma 1.0 51
Input settings
No-signal input monitoring 10000ms (10 seconds) 53
Setting HDCP input ENABLE 53
Input equalizer ON 54
Automatic detection of input video
interruption
ON 54
Fixing setting for each input Setting mode :SELECTED
ASPECT :ON (FIXED)
AUDIO LEVEL :OFF
55
Input timing
Horizontal Start position 0 (automatically set up if signal is input) 57
Horizontal Active area 0 (automatically set up if signal is input) 58
Vertical Start position 0 (automatically set up if signal is input) 57
Vertical Active area 0 (automatically set up if signal is input) 58
Output settings
Output mode HDMI YCbCr4:4:4 MODE
(Output appropriate mode depending on connected
sink device.)
61
Synchronous signal output with no
input video
ON 61
Output video with no input video BLUE 62
Window transition effect FREEZE
→
FADE OUT-IN 62
Window transition speed 350ms 62
Wipe color R / G / B: 0 (black) 63
HDCP output ALWAYS 63
The number of HDCP retries ETERNITY (retrying until success) 63
Deep Color 24-BIT COLOR 64
CEC connection NOT CONNECTED 64
Fixing setting for each input All input channel’s priorities: OFF 55
Masking time after automatic
switching of input channel
0 ms (masking: OFF) 66
Audio settings
Output level
±
0dB 69
Output mute OFF 69
Input level
±
0dB 70
Audio output connector ANALOG&DIGITAL 69