MSD-402 User’s Guide
61
8.8.1 Output mode
Menu OUTPUT SETTING
→
OUTPUT MODE
Setting for Each output channel
Setting value
・
DVI MODE
・
HDMI YCbCr4:2:2 MODE
・
HDMI RGB MODE
・
HDMI YCbCr4:4:4 MODE [Default]
You can select an output mode.
Select “HDMI YCbCr4:4:4 MODE” to output video with the optimal mode automatically even if a sink device
that does not support HDMI component signal or DVI signal is connected. If you want to output video with
HDMI RGB signal or DVI signal forcibly, set the desired mode.
The MSD checks signal types in order of the table below and output signal with the first matched signal type.
[Table 8.8] Output mode priority
Output mode
Signal supported by sink device
DVI
HDMI
RGB
HDMI
YCbCr4:2:2
HDMI
YCbCr4:4:4
DVI MODE
1st
-
-
-
HDMI RGB MODE
2nd
1st
-
-
HDMI YCbCr4:2:2 MODE
3rd
2nd
1st
-
HDMI YCbCr4:4:4 MODE
4th
3th
2nd
1st
Note:
If you set “DVI MODE”, digital audio cannot be output. “HDMI YCbCr4:4:4 MODE” and “HDMI YCbCr4:2:2
MODE” are only output when the resolution is AV resolution (480i, 576i, 720p, 1080i, 1080p), and PC
resolutions are output “HDMI RGB MODE” or “DVI MODE”.
8.8.2 Synchronous signal output with no input video
Menu OUTPUT SETTING
→
SYNC OUTPUT
Setting for Each output channel
Setting value ON [Default], OFF
You can set whether synchronous signal is output when no video signal is input from the selected input, or
when ”OFF” is selected for the input. If you set this menu to “ON”, you can prevent the sink device from being
switched to the standby mode.
Note:
When PinP output turns “ON” from “OFF”, the MSD does not output synchronize signal only if all input
channels become no signal.
