IDK MSD-402, User Manual

Page: 109 / 120

MSD-402 User’s Guide
109
8.15.3 Sink error status
Menu STATUS
→
ERROR STATUS
Display value [Table 8.44] Error status of sink device
You can confirm the error statuses of sink devices. Error statuses of all output channels are displayed.
Error messages of audio output are not displayed on PinP output.
[Table 8.44] Error status of sink device
ERROR STATUS Sink device status
VIDEO ERROR Error message (Audio output)
DIGITAL AUDIO ERROR Error message (Digital Audio output)
ANALOG AUDIO ERROR Error message (Analog Audio output)
■
Error message
[Table 8.45] Error message (video output)
Error message Description
No message: Video is output correctly.
Not DDC Power No DDC power is input.
(If no source device is connected, this message appears.)
No Signal No video signal is input.
AV Mute Received Video output of source device is muted.
HDCP Video Mute Signal with HDCP is input, but sink device does not support HDCP.
(May appear during HDCP authentication process)
Not AVIInfoFrame Source device does not output information (packet) which is necessary for
outputting video signal.
Dot Clock Over Unsupported signal is input to the MSD.
Channel OFF Input channel is set to “OFF”.
[Table 8.46] Error message (digital audio output)
Error message Audio output
No message: Video is output correctly.
Audio Mute “ 8.9.2 Output mute ” is set to “ON”.
Not DDC Power No DDC power is input.
(If no source device is connected, this message appears.)
No Signal No audio input signal
AV Mute Received Audio output of source device is muted.
HDCP Audio Mute Signal with HDCP is input, but sink device does not support HDCP.
(May appear during HDCP authentication process.)
Not AUDInfoFrame Source device does not output information (packet) which is necessary for
outputting video signal.
Compressed Audio The MSD cannot output audio because compressed audio is input. (The
MSD can only output compressed audio to sink device supporting
compressed audio.)
Digital Out OFF “ 8.9.3 Audio output connector ” is set to “ANALOG”.
DVI Mode “ 8.8.1 Output mode ” is set to “DVI MODE” or sink device does not support