IDK MSD-402 User Manual Download Page 99

Page: 99 / 120

MSD-402 User’s Guide

■

Dividing mode

3MByte

registered

3MByte

registered

3MByte

registered

3MByte

registered

AUTO

RESIZE

DELETE

8MByte

2MByte

4MByte

8MByte

①

②

③

④

①

②

Before divide

8MByte

After divide

2MByte

Into four
sections

2MByte

①

②

③

④

3MByte

registered

1.7MByte

1.6MByte

8MByte

①

②

③

④

2MByte

8MByte

①

②

③

④

Into three

sections

①

②

2MByte

registered

2MByte

③

1.7MByte

1.6MByte

5MByte

①

②

③

④

Into two

sections

①

②

4MByte

2MByte

registered

2MByte

①

②

③

2MByte

registered

1MByte

2MByte

①

②

Before divide

Into four
sections

Into two

sections

After divide

8MByte

2MByte

①

②

③

④

The memory area is divided equally
regardless of whether bitmap is registered or
not.

If no bitmap is registered, the memory is
divided equally.

2MByte

registered

2MByte

registered

2MByte

registered

If a bitmap is registered, the area of the
bitmap is kept. The rest memory area is
divided equally.

The area of the bitmap is limited to the
bitmap size. The rest memory area is
divided equally.

3MByte

registered

After divided, if the area  of the bitmap is
smaller than  the  bitmap size, the bitmap will
be deleted.

After divided, if the number of sections
becomes smaller, the registered bitmap may
be deleted.

The start position of the area in which bitmap
is registered is not changed. The area just
before the registered bitmap is not resized.

After divided, if the area of the bitmap is
enough for the bitmap, the bitmap will not be
deleted.

2MByte

registered

3MByte

registered

[Figure 8.42] Dividing mode

Summary of Contents for MSD-402

























































































































Search results

Summary of Contents for MSD-402

Reviews:

Related manuals for MSD-402

Brands by name

Popular brands

IDK MSD-402, User Manual

Search results

Summary of Contents for MSD-402

Reviews:

Related manuals for MSD-402

Brands by name

Popular brands