IDK MSD-402 User Manual Download Page 17

Page: 17 / 120

MSD-402 User’s Guide

6.3 Cabling

When connecting the MSD to the external devices, please observe the following precautions.

・

Read manuals of the external devices.

・

Before you connect the cable to the MSD or an external device, please remove electrification of the body
by touching the metal around that is grounded.

・

Turn off all devises’ power before connecting the cable.

・

Be sure to plug cables completely and install them without any stress on connectors.

・

Fix HDMI cables using cable clamps to prevent those cables from falling off.

Fixing HDMI cable using cable clamp

Removing HDMI cable and cable clamp

①

②

③

Pull out while pressing

④

②

④

⑤

①

③

[Figure 6.1] Attaching a cable clamp

6.3.1 Cables

IDK provides various digital cables such as HDMI, DVI, and twisted pair cables.

Select appropriate cables for your system configuration. For analog audio and RS-232C, process the cable as

needed to fit the connectors.

【

See: 6.3.3 Connecting audio cables

】

【

See: 6.3.4 Connecting RS-232C cable

】

Summary of Contents for MSD-402

























































































































Search results

Summary of Contents for MSD-402

Reviews:

Related manuals for MSD-402

Brands by name

Popular brands

IDK MSD-402, User Manual

Search results

Summary of Contents for MSD-402

Reviews:

Related manuals for MSD-402

Brands by name

Popular brands