IDK MSD-402, User Manual

Page: 95 / 120

MSD-402 User’s Guide
95
8.13.4 Aspect ratio
Menu BITMAP
→
ASPECT
Setting for Each output channel, each bitmap
Setting value [Figure 8.39] Setting aspect ratio
Bitmap (1024x768)
(1920x1080)
●
AUTO [Default]
●
THROUGH
●
FULL
(1920x1080) (1920x1080)
[Figure 8.39] Setting aspect ratio
You can set the aspect ratio of bitmap.
If you select “AUTO”, the aspect ratio is kept. However, the bitmap size is larger than the output resolution, a
part of the bitmap is displayed.
For the PinP the image is displayed as follows:
- “AUTO”: Since the aspect ratio is kept, the image is displayed with the setting of “THROUGH” if either of H or
V of “ 8.4.7 Display size” cannot be enlarged. Once both H and V can be enlarged, the enlarged image will
be displayed.
- “THROUGH”: The image is displayed within the size set in “ 8.4.7 Display size”.
- “FULL”: The aspect ratio is ignored and the image is enlarged up to the display size. If bitmap’s “H” / “V” can
be enlarged to the display size set in “ 8.4.7 Display size”, the image will be enlarged.
If no bitmap is registered, you cannot set this menu.