MSD-402 User’s Guide
22
7 Basic operation
7.1 Required time
The MSD starts when the AC adapter is connected and power is supplied. All LEDs other than the POWER
LED light until the MSD starts up completely. After that, it takes few seconds to execute the following
operations.
[Table 7.1] Required time
Operation
Required time
Receiving communication commands
6 or longer seconds
Receiving front panel operations
9 or longer seconds
Receiving WEB browser operations
7 or longer seconds
Note:
If “
8.13.7 Bitmap output at startup
” is set to “ON”, the required time may be longer.
7.2 Switching input channel
7.2.1 Selecting input channel
Press the desired channel key.
IN2 input signals will be output to OUT1.
IN3 input signals will be output to OUT2.
[Figure 7.1] Select input channel
7.2.2 Turning OFF input signal
You can disable the input signal by pressing the input key that is currently selected. You can enable or disable
the input signal by toggle operation.
Enabled (LED lights)
Disabled (LED does not light)
Pressing the selected input key.
(Toggle operation)
[Figure 7.2] Turn OFF input signal
You can set this menu from the WEB browser menu.
【
See: 8.3.1 Selecting input channel (WEB menu)
