Page 55 -
Tunnel Master® Jr. User Manual
Chapter 6: Entrance Keypad
View Service Counts for the Current Shift
There will be times during the course of daily operations that management personnel will want to review sales
counts. From the View Counts menu, this option allows the user to quickly determine how many of each service
option have been processed during the current shift.
If the user did not purchase the optional report printer, the Viewing Counts menu option will be the only way they
can track sales during a shift.
After the shift is either manually closed or automatically bumped by the system, the counts will be cleared back
to zero to start the new shift. For this reason, if the user wishes to verify a register report to the controller counts
these numbers must be written down at the end of each shift before the shift is closed.
NOTE:
To clear a button selected in error, simply press the button again, and the LED light will go out.
Step
Action
Screen Display
1
From the Main Screen display, access the
Main Menu by pressing the Menu button.
NOTE: If a password has been set, it will be
necessary to enter the password before the
Main Menu can be accessed.
[1] Bump Shift [4] View Counts
[2] Wet Down Wash
[5] Print Reports
[3] Configure Wash
2
Press the numeric 3 key to select View
Counts.
Unloaded = Vehicles washed without a
service being programmed.
Cars = # of cars washed Violations = Number
of times maximum car length exceeded.
00 – UNLOADED 0000 CARS WASHED: 135
VIOLATIONS: 0
3
Press the ENT button on the display keypad
to advance to additional services.
EXTERIOR W 0052 05- POLISH WAX 0023
SILVER WAS 0023 06-CLEAR COAT 0015
GOLD WASH 0015 07-[EMPTY]
0000
PLATNUM W 0009 08-[EMPTY]
0000
4
Repeat Step 3 to review up to 32 possible
services.
NOTE: Any service number skipped in the
service setup will display as EMPTY.
5
Press the MENU button on the display pad
to return to the Main Menu.
[1] Bump Shift [4] View Counts
[2] Wet Down Wash
[5] Print Reports
[3] Configure Wash
Bump Shift
There are two ways to break or close a shift. The first is to go into Wash Settings and select Yes for the Auto Shift
menu option. This option will automatically close the shift at midnight each night. The second option is to go
to the main display menu and select Bump Shift. This option allows the user to close a shift manually at a time
selected by the user. This option would be used by operators that wish to balance their shifts at the end of the day
instead of waiting until the next morning.
Table 6-4.
View Service Counts for the Current Shift
Summary of Contents for Tunnel Master Jr
Page 1: ...Tunnel Master Jr User Manual Version 5 0...
Page 70: ......