Tunnel Master® Jr. User Manual
- Page 52
Chapter 6: Entrance Keypad
Entrance Keypad to Process Vehicles (Non-Stacking)
These are the steps to follow for a non-stacking system.
Step
Non-Stacking Action
Keypad Response
1
On the numeric keypad, press the button
associated with the service the customer has
purchased.
The red indicator light will light up indicating the input has
been accepted.
2
Press any additional extra service buttons
for other services the customer may have
purchased.
The red indicator light will light up for each additional service
button pressed indicating the input has been accepted.
NOTE:
Any service selected accidentally can
be un-programmed or cleared by pressing
the service button again.
The LED light will go out, indicating the service is no longer
programmed.
3
Press the Receipt button to print a customer
receipt, if there is a receipt printer attached
to the Entrance Keypad.
Customer receipt will print out.
4
After all the desired services are “loaded”
and the vehicle is staged and ready to be
washed, press the “Roller” button (the button
with the car on it) to fire roller and start the
vehicle through the wash.
NOTE:
Once the roller button has been
pressed the roller relay will be activated and
a roller will come up to process the vehicle
through the wash.
The indicator light on the roller button will light up indicating
that the input has been accepted. The light will remain lit
until the roller sequence is complete.
5
When the vehicle starts through the wash
breaking the gate switch and reaching the
minimum car length required, all numeric
lights on the keypad will go out.
NOTE:
All the indicator lights will stay lit until
there has been enough chain travel to reach
minimum car length set in wash settings.
All indicator lights will go out after the car has reached
minimum car length. When the lights go out, this indicates
the next wash is ready to be programmed.
Table 6-2.
Entrance Keypad Process Vehicles
Summary of Contents for Tunnel Master Jr
Page 1: ...Tunnel Master Jr User Manual Version 5 0...
Page 70: ......