Page 51 -
Tunnel Master® Jr. User Manual
Chapter 6: Entrance Keypad
Entrance Keypad Buttons
You can add services, remove services, select retracts, and remove a car from the stack with the Entrance
Keypad. First, set up your Tunnel Master® Jr. relay box to the Entrance Keypad for stacking. The following
buttons are the functions for the Entrance Keypad.
All buttons, with the exceptions of the AC, and $ (dollar) buttons, have red indicator lights in the upper left-
hand corner of the button. These red indicators will light after the button is selected and stay lit until the
vehicle has started through the gate switch and reached minimum car length.
To clear a button selected in error, simply press the button again, and the LED light will go out.
Button
Function
1
After all desired services have been entered, but before the Roller button is
pressed, press the $ (dollar) button to confirm services. If optional printer is
available, a receipt will print too.
2
Numeric buttons (1-16) are used to program services or retracts into system
prior to processing vehicle.
3
The car icon is on the Roller button and when selected will activate the roller
relay.
4
In ICS-POS mode, when the AC button is selected, the stack displays in
blinking Led lights on the numeric buttons. Number one is the closest to the
tunnel entrance. The stack blinks for 5 seconds.
Table 6-1.
Entrance Keypad Buttons
Summary of Contents for Tunnel Master Jr
Page 1: ...Tunnel Master Jr User Manual Version 5 0...
Page 70: ......
