Tunnel Master® Jr. User Manual
- Page 36
Chapter 4: Wash Configuration
Wash Setting Field
Description
Auto Shift
Enter
Y
for yes,
N
for no. If you set this option to
Y,
the system will
automatically close the shift at midnight. This option should be set to
Y
if
you are using the Tunnel Master® Jr. Interface.
Tax Rate 1.0%
The percentage rate for the first tax rate charge.
Tax Rate 2.0%
The percentage rate for the second tax rate charge.
Stacking
Enter
Y
for yes or
N
for no. If you set this option to
Y,
the system will start
stacking. This option should be set to
N
if using the Tunnel Master® Jr.
Interface.
Input Device
This is set K for keypad, P for push button, C for Computer / Controller, B
both keypad and Wash Valet, or W for Wash Valet talking directly to a TMJ.
This is used to interface with the Tunnel Master® Sr. device.
Push Button Rows
If a push button entry station is being used, enter the number of rows, going
across, of buttons on the station. This will tell the system what inputs to
accept. If you do not have a push button station, this option is disregarded.
Push Button Cols
If a push button entry station is being used, enter the number of columns,
going down, of buttons on the station. If you do not have a push button
station, this option is disregarded.
Console Debug
This is a debug utility that ICS may use to track system activity. This should
be set to
N
if you are using the Tunnel Master® Jr. Interface.
Header 1
Enter information desired to display on the first line on the top of reports
and receipts. This is usually company information.
Header 2
Enter information desired to display on the second line on the top of reports
and receipts. This is usually company information.
Header 3
Enter information desired to display on the third line on the top of reports
and receipts. This is usually company information.
Header 4
Enter information desired to display on the fourth line on the top of reports
and receipts. This is usually company information.
Footer 1
Enter information desired to display on the first line on the bottom of
receipts. This is usually a message to the customer.
Footer 2
Enter information desired to display on the second line on the bottom of
receipts. This is usually a message to the customer.
Footer 3
Enter information desired to display on the third line on the bottom of
receipts. This is usually a message to the customer.
Footer 4
Enter information desired to display on the fourth line on the bottom of
receipts. This is usually a message to the customer.
Display Cars
Enter
Y
for yes,
N
for no. When this option is set to yes, the daily car count
will display on the main display on the relay box.
Car Count
Displays the number of cars for the current shift. This is reset when you
bump a shift.
Invalid Count
This is the number of times in the current shift that the gate input started
to sense a car, but it did not measure up to the Min Car Length. This is reset
when you bump a shift.
Summary of Contents for Tunnel Master Jr
Page 1: ...Tunnel Master Jr User Manual Version 5 0...
Page 70: ......