ICS Nav6plus, User Manual, Page: 38 / 90

NAV6 plus NAVTEX System User Guide
38
station filter to Nearest. To print messages from all stations in range of
your current position, set the auto station filter to In Range. An asterisk
appears next to all stations for which messages will be printed.
Note : the GPS must be left on or messages from all stations will be
printed, once the GPS position has timed out.
Set the filter for each station to one of the following:
Setting Notes
On Messages from station always printed
Off Messages from station never printed
Auto Messages from station printed only when nearest or in
range depending upon setting.
Setup Mode, NAVTEX View, 518 and 490 Names Pages Setup Mode, NAVTEX View, 518 and 490 Names Pages Setup Mode, NAVTEX View, 518 and 490 Names Pages Setup Mode, NAVTEX View, 518 and 490 Names Pages
The station names setup pages
determine the names of stations
displayed on station filter pages and
in NAVTEX message headers.
The picture shows the ‘518 Names’
page; the ‘490 Names’ page is
similar.
Use the UP and DOWN keys to
select the setting that you wish to
edit. Use the LEFT and RIGHT keys
to change the setting.
The Station Name Selection setting allows the user to select between
‘GPS’ and ‘Manual’ station selection. If ‘GPS’ is selected the NAV6 will
select the NAVTEX transmitting station name nearest to the boat’s