ICS Nav6plus, User Manual, Page: 58 / 90

NAV6 plus NAVTEX System User Guide
58
• Position the NAV6 over the holes and insert the screws.
•
Carefully tighten the screws, do not over-tighten the screws.
•
Clip the screw covers in place, should you have difficulty replacing
the screw covers, slightly slacken off the screws.
U - Bracket Mounting Option U - Bracket Mounting Option U - Bracket Mounting Option U - Bracket Mounting Option
See fitting instructions supplied with the U-bracket Mounting Kit.
NAV4 to NAV6 Conversion Mounting Plate Option NAV4 to NAV6 Conversion Mounting Plate Option NAV4 to NAV6 Conversion Mounting Plate Option NAV4 to NAV6 Conversion Mounting Plate Option
See fitting instructions supplied with the NAV4 to NAV6 Conversion
Mounting Plate kit.
CONNECTING UP CONNECTING UP CONNECTING UP CONNECTING UP
The display connecting cable consists of six twisted pairs within a foil
screen and drain wire:
Twisted Pair Core Colour Signal description
RED twisted with BLACK RED 12V input
BLACK GND input
BLUE twisted with BLACK BLUE NMEA A input
BLACK NMEA B input
BROWN twisted with BLACK BROWN RS232 TX output
BLACK RS232 RX input
WHITE twisted with BLACK WHITE sensor DATA B
BLACK sensor DATA A
YELLOW twisted with BLACK YELLOW sensor POWER o/p
BLACK sensor GND o/p
GREEN twisted with BLACK GREEN programming signal
BLACK spare
Screen Silver Nominally 0V