ICS Nav6plus, User Manual

Page: 16 / 90

NAV6 plus NAVTEX System User Guide
16
Manual Station Selection
If no GPS position fix is available or no GPS is connected to the system,
you will probably need to manually select or de-select unwanted stations
from view.
Go to the [NAVTEX Mode
⇒ ⇒ ⇒ ⇒
Filter View
⇒ ⇒ ⇒ ⇒
490 or 518 Stns Page].
Select the required 'active preset number' (use preset 1 if you are just
starting for the first time).
•
Use the UP & DOWN keys to move the cursor over the station
name.
•
Use the LEFT & RIGHT cursor keys to change between ON, OFF
(not AUTO)
Message Filtering
You can further reduce the amount of messages that are displayed by
applying filters to the message categories.
Go to the [NAVTEX Mode
⇒
⇒ ⇒
⇒
Filter View
⇒
⇒ ⇒
⇒
490 or 518 Types Page].
•
Select the required 'active preset number' (use preset 1 if you are
just starting for the first time).
Each message category type can be turned ON or OFF, or made to
display NEW messages only by using the UP, DOWN, LEFT & RIGHT
keys.
‘New’ Messages
Sometimes it is useful to know which messages have been received
since you last looked at the NAV6
plus display. Whenever a message is
received the message header box displays a ‘NEW’ or 'SAR' icon.
Even if a new message is currently out of view, the status bar at the top
of the display will also indicate a ‘NEW’ icon.
Go to [NAVTEX Mode
⇒ ⇒ ⇒ ⇒
Message View]
•
What was the PAGE soft key has changed to a NEXT NEW key.