ICS Nav6plus, User Manual

Page: 21 / 90

NAV6 plus NAVTEX System User Guide
21
NAVTEX Mode, Message View NAVTEX Mode, Message View NAVTEX Mode, Message View NAVTEX Mode, Message View
Used to view messages. Each new message can be accessed by a
single key press & then marked as read, if required.
The NEXT NEW softkey should be used to move the next new message
to the top of the NAVTEX display, where it can be marked as read by
pressing MARK READ. Note that the message that will be ‘marked as
read’ is indicated in the top left of the status bar. This is particularly
useful when the message’s header has scrolled off the top of the display
area.
NAVTEX Mode, Print View NAVTEX Mode, Print View NAVTEX Mode, Print View NAVTEX Mode, Print View
Allows individual messages to be printed. The ‘Print View’ is only
displayed if the manual print setting is enabled on the [Setup
Mode
⇒
⇒ ⇒
⇒
NAVTEX View
⇒
⇒ ⇒
⇒
Options Page]. Printing is only possible if an
external printer or PC is installed as part of the system.
The NEXT NEW softkey can be used to move the next new message to
the top of the NAVTEX display where pressing PRINT will print it.
NAVTEX Mode, Sort View NAVTEX Mode, Sort View NAVTEX Mode, Sort View NAVTEX Mode, Sort View
From within this view different sort criteria can be applied to change the
order of the messages on the display. The NAVTEX Mode display can
be sorted in one of three ways by pressing the CRITERIA softkey:
Sort by Station
Sort by Type
Sort by Date
The sort can be further organised in ascending or descending order by
pressing the ORDER softkey.
Sort by Station
Sorts by station name.
Ascending sort is 490 stations A to Z , then 518 stations A to Z.
Messages are ordered by message category A to Z.
Descending sort is 518 stations Z to A, then 490 stations Z to A.
Messages are ordered by message category Z to A.