NAV6
plus
NAVTEX System User Guide
20
ADVANCED OPERATION
ADVANCED OPERATION
ADVANCED OPERATION
ADVANCED OPERATION
This section provides a detailed description of the ‘advanced’ operation
of your NAV6
plus
. The three operating modes are described in detail.
Remember to use the right-hand
MODE
softkey to switch between the
operating modes.
NAVTEX MODE
NAVTEX MODE
NAVTEX MODE
NAVTEX MODE
NAVTEX Mode is only available if a sensor
is (or has been) connected to the display
and the NAVTEX frequency setting on the
NAVTEX options page is set to 518 kHz,
490 kHz or Both.
In NAVTEX Mode, the display consists of a
large area dedicated to displaying NAVTEX
messages, with a status bar at the top, and
descriptions of the softkey functions at the
bottom.
It is possible to scroll up and down the
messages line by line, using the UP and
DOWN keys. Additionally, you can step
through the display, message by message
using the LEFT and RIGHT keys.
Four different ‘views’ can be selected by pressing the VIEW softkey:
Message View
Print View
(when enabled in setup)
Sort View
Filter View
Summary of Contents for Nav6plus
Page 11: ...NAV6plus NAVTEX System User Guide 11...
Page 42: ...NAV6plus NAVTEX System User Guide 42 Contact your supplier for further information...
Page 46: ...NAV6plus NAVTEX System User Guide 46...
Page 52: ...NAV6plus NAVTEX System User Guide 52 page 62 of this user guide...