NAV6
plus
NAVTEX System User Guide
37
screens.
There is a stations and types filter page for each selected receive
frequency. Use the PAGE softkey to select one of the four possible filter
pages: 518 Stations, 518 Types, 490 Stations, or 490 Types.
The picture shows the 490 Types
filter page; the 518 Types filter page
is similar.
Each of the message types can be
selected as either ON or OFF.
Use the UP and DOWN keys to
select the message type setting that
you wish to edit. Use the LEFT and
RIGHT keys to change the setting.
The picture shows the 518 Stations
filter page; the 490 Stations filter
page is similar. Use the UP and
DOWN keys to select the station
filter setting that you wish to edit.
Use the LEFT and RIGHT keys to
change the setting.
The ‘Auto Station Filter’ setting can
be either Nearest or In Range. The
setting is active only when you have
a GPS receiver connected to the
NMEA input and it applies only to
stations set to Auto. To print
messages from the nearest station
to your current position, set the auto
Summary of Contents for Nav6plus
Page 11: ...NAV6plus NAVTEX System User Guide 11...
Page 42: ...NAV6plus NAVTEX System User Guide 42 Contact your supplier for further information...
Page 46: ...NAV6plus NAVTEX System User Guide 46...
Page 52: ...NAV6plus NAVTEX System User Guide 52 page 62 of this user guide...