Firmware Version 1.2
MultiSystem 4070
92
Operating software
DEU
USB (DEVICE)
USB mode
Choose from the following options:
•
USB device
: The measuring instrument is only enabled for communica-
tion with the PC. Drives are not enabled for the PC.
Example: using the HYDROlink software.
•
Mass storage device
: The measuring instrument is enabled for commu-
nication with the PC and at least one drive is enabled for the PC. Drives
can be enabled for the PC. The default drive to be enabled is the DOCU-
VOL drive.
If you want to transfer measuring data to the PC without additional soft-
ware, enable the DATA-VOL drive.
See
Connect a PC and transfer data
DATA volume
DOCU volume
Can only be selected if
USB mode
is set to
Mass storage device
. Choose
from the following options:
•
Bind
: The volume is bound to the measuring instrument and cannot be
addressed as an external drive by the PC.
•
Expose
: The volume is visible on the PC as an external drive.
Enable the
DATA volume
in order to transfer files directly from the measuring
instrument to a PC. You can use any file browser for this.
OK
Confirms input/saves change.