Firmware Version 1.2
MultiSystem 4070
97
Operating software
DEU
3
Open the
Unit
dialog entry:
4
Select the desired unit:
5
Confirm changes and exit dialog:
The new unit system will be used the next time the instrument is switched
on again.
Unit
Select the unit system
•
SI (bar)
The measuring instrument uses the units of the SI system. However, for
pressure, the unit bar is used.
•
US
The measuring instrument uses the units that are common in the USA
(e.g. psi, °F).
•
SI (MPa)
The measuring instrument uses only the units of the SI system. Pressure
will be displayed in MPa.
Channel numeration
Select between automatic and manual channel numbering.
Channel numeration function
As a standard, the MS 4070 numerates all channels with a letter and an index
number. If three pressure sensors are connected, the channels will be numer-
ated as p1, p2 and p3 automatically. If you now connect, e.g. a temperature
sensor instead of p1, this channel will become T1. The two other channels will
be renamed, p2 will become p1 and p3 will become p2.
By changing the channel numeration from
AUTO
to
MANUAL
, you can assign
fixed index numbers to the channels (see Kapitel
auf Seite 69). These will be kept even after the chan-
nel assignment has changed. In the example shown above, the three channels
would be numerated as T1, p2 and p3.
Highlight the dialog entry with
and press
to toggle between
AUTO
and
MANUAL
.
Color scheme
Select the color scheme for the user interface.
Activation menu
Select which display is shown when the measuring instrument is switched on:
•
MEASURE
•
MAIN MENU
(displays the
Home
menu)
