Firmware Version 1.2
MultiSystem 4070
34
Operation
DEU
Recording time
Enter how long measurement data is to be recorded. Select the desired time
unit.
Scanning rate
Define how often measurement data is to be recorded. Select the desired time
unit.
Channels
Activate the channels where the measurement data is to be recorded.
Trigger 1
A trigger is a condition that has to happen to make the storing of measurement
data start or stop. In this case, no trigger is defined.
Please see section Kapitel
auf Seite 107 for further infor-
mation on how to use the trigger function.
Display information on selected file
If you have selected a file (e.g. measurement file, configuration file, screen-
shot, etc.), you can use
to display information about the contents of the file.
The information that is visible will depend on the file type. For screenshots, a
preview of the image is displayed. If a note has been saved in the measure-
ment file you can edit it with
.
Press
to exit the dialog.
Recording time and scanning rate define how often and how long measurement
data is to be stored. Be aware that if you store too much measurement data, the
later evaluation and presentation will become more difficult.
Information about a file can be displayed in many dialogs.
