Firmware Version 1.2
MultiSystem 4070
80
Operating software
DEU
Selection
The selected channel extension box is displayed here. You can
use
to select a different channel extension box.
Node ID
The
Node ID
of the selected channel extension box is displayed in decimal
and hexadecimal numbers.
Port
The four possible inputs for the selected channel extension box are displayed.
Additional data on the port is shown in a dedicated column under each port
number. The active port is highlighted in green.
Signal type
Displays the
signal type
of the relevant port.
Unit
Displays the
unit
of the relevant port.
Reference channel
The reference channel for each port is displayed. When a channel extension
box is selected, Firmware Version 1.2 the free as yet unused measurement
channels are automatically assigned to the ports as reference channels. If all
measurement channels are already assigned, a “?” appears and you can se-
lect and overwrite an assigned measurement channel manually.
You can change the configuration for each of the four measurement channels.
Use
to switch to the next column to the right and
to switch to the next
column to the left to highlight a measurement channel. The active measure-
ment channel is highlighted in green. Use
to open the dialog with the
settings of the highlighted measurement channel in order to change the
configuration.
Configure special channels (Ch8 ... Ch17)
Channel name
Displays the measurand set for each reference channel.
Unit
Displays the
unit
set for the measurand in the reference channel.
Measuring range from/
to
The measuring range
from
and
to
set for the corresponding reference channel
is displayed here.
