manualshive.com logo in svg

ICS Auto Sentry flex, User Manual

Share
Download
ICS Auto Sentry flex User Manual Download Page 24

Auto Sentry® 

flex

 User Manual

24

Introduction

Figure 2. Facility without setting up the Safe

Auto Sentry® 

flex

 Hardware Description

The 

Auto Sentry® flex

 is equipped with various hardware and software components you can 

configure.

Touch Screen

The 

Auto Sentry® flex

 touch screen is durable and was designed and built for reliability in all types 

of harsh environments. The entire unit, including the touch screen, has been rated IPX NEMA 4X. 
The enclosure is built for rugged endurance for either indoor or outdoor use to provide a degree 
of protection against falling dirt, rain, sleet, snow, windblown dust, splashing water, and hose-
directed water. The enclosure’s design guards against damage from the external formation of ice 
and prevents corrosion.

VIRTUAL SAFE

POS

TOUCH IT

FLEX

POS, TOUCH IT  &  FLEX 

WITHOUT

 VIRTUAL SAFE

X

X

X

Summary of Contents for Auto Sentry flex































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands