manualshive.com logo in svg

ICS Auto Sentry flex, User Manual

Share
Download
ICS Auto Sentry flex User Manual Download Page 105

Auto Sentry® 

flex

 User Manual

105

Service Unit Screen

-or-
If need to do some maintenance while in the unit, select the 

Disable Alarm

 button to prevent 

the alarm from inadvertently going off.
When the Disable Alarm button is selected, it reappears as Enable Alarm. 

3

Select the 

Enable Alarm

 button to reactivate the Vandalism Alarm.

4

If one forgets to select the Enable Alarm button, exiting the Service Unit screen will 
automatically enable the alarm.

Figure 76. Diagnostic Screen to disable and reset the Vandalism Alarm

Terminal Balances

In WashConnect, on the 

Financial

 menu, click 

Cash Management

, and then click 

Terminal 

Balances 

to view the current Terminal Balances.

The Terminal Balances shows the total bills, coins, and tokens in each Auto Sentry® terminal. You 
can also select 

Safe

 to view balances in the virtual safe. The numbers are updated in real time as 

customers make purchases at your Auto Sentry®. Therefore, you can view the Terminal Balances 
dialog box to decide whether you should add to or remove the cash in your Auto Sentry®.



For more information, see “Add Coins or Coin Tokens” on page 97 and “Remove 
Bill or Coins (from the Auto Sentry)” on page 100.

The table below provides descriptions of each numbered area in the figure.

Summary of Contents for Auto Sentry flex































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands