manualshive.com logo in svg

ICS Auto Sentry flex, User Manual

Share
Download
ICS Auto Sentry flex User Manual Download Page 120

Auto Sentry® 

flex

 User Manual

120

Marketing with your Auto Sentry

Ordering Video Clips

The following clips are available:

Rain-X

®

Tire shine

Polish wax

Sealer wax

Under carriage

These short promotional clips are provided at no charge. Contact ICS technical support for more 
information.

Recording Video Clips

You can record your own video clips. 

Tip

The narrator should be recorded in a portrait setting with their head and top of shoulders just 
inside the frame.

Naming Video Clips

Video clip file names are a maximum of eight characters.

Saving Video Clip Files

Video clips must be saved as audio-video interleave (.avi) format. By using a network connection, 
the video clip files must be saved on the Auto Sentry® 

flex

 drive.

Save primary language video clip files here:

\ICS\AVIFiles\Primary\

Save secondary language video clip files here:

\ICS\AVIFiles\Secondary\

Figure 85. Example Video Clip File in AVI Files Directory

Summary of Contents for Auto Sentry flex































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands