icoms I-SAFE User Manual Download Page 14

Page: 14 / 59

Insert the battery in the slot, as for the mobile kit, and switch it on.

Connect the solar panel above the service box (Figure 3, p. 10, mark nr 8).

Please first switch the battery on, before connecting the solar panel.

If you prefer using your own solar panel, the female connector is available as an option (mark 23).

3.4.2.2

Solar regulator

The solar regulator is mounted in the service box. Different LEDs indicate the state of the material:

LED

State

Meaning

LED info

Switched on green Normal operation

Flashing

slowly

red*

System fault:

Too high charging current

Overload/short circuit

Overheated

Together with red LED: too low battery voltage

Together with green LED: too high battery voltage

Battery red LED

Flashing quickly*

Battery empty, low voltage disconnection pre-warning,
loads still on.

Flashing slowly*

Deep discharge protection active (LVD

–

low voltage

detection)

–

loads disconnected

Battery yellow LED

Switched on

Battery weak

–

loads are on.

Flashing

slowly

yellow*

LVD reconnection setpoint has not yet been reached

–

loads still disconnected

Battery green LED

Switched on

Battery OK

Flashing quickly*

Battery fully charged

–

charge regulation active

* Flashing slowly: 0.4 Hz or four times in 10 second; flashing quickly: 3 Hz ; or three times per one
second.

Summary of Contents for I-SAFE




























































Search results

Summary of Contents for I-SAFE

Reviews:

Related manuals for I-SAFE

Brands by name

Popular brands

icoms I-SAFE, User Manual

Search results

Summary of Contents for I-SAFE

Reviews:

Related manuals for I-SAFE

Brands by name

Popular brands